Bare Metal
Using your existing ADS-B receiver
On this page
- These scripts aid in setting up your current ADS-B receiver to feed adsb.lol
- They will not disrupt any existing feed clients already present
1: Find coordinates / elevation:
https://www.freemaptools.com/elevation-finder.htm
2: Install the adsblol feed client
curl -L -o /tmp/lol-feed.sh https://adsb.lol/feed.sh
sudo bash /tmp/lol-feed.sh
3: Check if your feed is working
That one’s easy! Just go to https://adsb.lol and you should show as feeding.
Optional: local interface for your data http://192.168.X.XX/adsblol
Install / Update:
sudo bash /usr/local/share/adsblol/git/install-or-update-interface.sh
Remove:
sudo bash /usr/local/share/tar1090/uninstall.sh adsblol
Misc maintenance
Update
Update the feed client without reconfiguring
curl -L -o /tmp/lol-update.sh https://raw.githubusercontent.com/adsblol/feed/master/update.sh
sudo bash /tmp/lol-update.sh
Troubleshooting issues
If you encounter issues, please do a reboot and then supply these logs on zulip (last 20 lines for each is sufficient):
sudo journalctl -u adsblol-feed --no-pager
sudo journalctl -u adsblol-mlat --no-pager
Display the configuration
cat /etc/default/adsblol
Changing the configuration
This is the same as the initial installation. If the client is up to date it should not take as long as the original installation, otherwise this will also update the client which will take a moment.
curl -L -o /tmp/lol-feed.sh https://adsb.lol/feed.sh
sudo bash /tmp/lol-feed.sh
Restart
sudo systemctl restart adsblol-feed
sudo systemctl restart adsblol-mlat
Systemd Status
sudo systemctl status adsblol-mlat
sudo systemctl status adsblol-feed
Uninstall
sudo bash /usr/local/share/adsblol/uninstall.sh
If the above doesn’t work, you may be using an old version that didn’t have the uninstall script,
just disable the services and the scripts won’t run anymore:
sudo systemctl disable --now adsblol-feed
sudo systemctl disable --now adsblol-mlat